Although APK downloads are available below to give you the choice, you should be aware that by installing that way you will not receive update notifications and it's a less secure way to download. We recommend that you install the F-Droid client and use that.
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
android.permission.USB_PERMISSION
(5.1)
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.3 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
android.permission.USB_PERMISSION
(5.1)
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.2 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.2 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.2 MiB
PGP Signature
-
This version requires Android 4.0 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android ? or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android ? or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.4 MiB
PGP Signature
-
This version requires Android ? or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.2 MiB
PGP Signature
-
This version requires Android ? or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view network connections
Allows the app to view information about network connections such as which networks exist and are connected.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
allow Wi-Fi Multicast reception
Allows the app to receive packets sent to all devices on a Wi-Fi network using multicast addresses, not just your phone. It uses more power than the non-multicast mode.
-
change network connectivity
Allows the app to change the state of network connectivity.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
-
pair with Bluetooth devices
Allows the app to view the configuration of the Bluetooth on the phone, and to make and accept connections with paired devices.
-
access Bluetooth settings
Allows the app to configure the local Bluetooth phone, and to discover and pair with remote devices.
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
read the contents of your SD card
Allows the app to read the contents of your SD card.
-
modify or delete the contents of your SD card
Allows the app to write to the SD card.
-
modify system settings
Allows the app to modify the system's settings data. Malicious apps may corrupt your system's configuration.
-
control Near Field Communication
Allows the app to communicate with Near Field Communication (NFC) tags, cards, and readers.
-
prevent phone from sleeping
Allows the app to prevent the phone from going to sleep.
Download APK
7.3 MiB
PGP Signature
